As the old saying goes, “prevention is better than cure”, which so happens to apply perfectly when it comes to your cooker. By taking the necessary steps needed to avoid potential problems with your oven, you can save yourself a bunch of hassle, time and money trying to fix it up. So, what are the things that you need to be doing to ensure your cooker continues to run as efficiently as possible and avoids any unwelcome issues? Below we take a look at 10 essential oven maintenance tips.

1. Check your oven door seal – Did you know that over 20% of an oven’s heat can escape if the doors are not sealed properly? This can and will result in incredible losses in efficiency, meaning your food is going to take a lot longer to cook – nightmare! To ensure your oven door seal is intact, simply open the door and feel the rubber gasket around the perimeter of the oven’s hatch to check for any broken, torn or worn sections. If you happen to find more than one broken area, then it is time to get your seal replaced! You can browse our range of replacement door seals & gaskets below.

2. Clean your broiler pan – One thing is for sure; broiler pans can be a real pain to clean. Nobody wants to spend hours scrubbing off old, burned food do they? An easy solution to clean your broiler pan is to heat the pan up and then sprinkle some detergent on the affected areas. Cover the laundry detergent with wet paper towels and after around 15 minutes, remove the towels and scrub the food off easily.

3. Salt a grease spill – Spillovers can be an annoying part of cooking, especially if you're making an effort to keep grease off of your cooking tray or dish. To make light work of cleaning up spills, simply sprinkle table salt over a spill before using your oven. Now, close the door and proceed to cook your food. When it’s finished, you might be surprised to see a tricky grease spill has turned into a cleanable pile of ash that can be easily swiped away.

4. Oil your oven rack – If you want your oven racks to glide smoothly when taking them out and putting them back into your oven, then it’s important to not ignore them. Start by cleaning the oven wall ridges that the racks slide in and out on using soap-filled steel wool pads. Once the ridges have dried, wipe them over with some vegetable oil. Your oven racks should now glide on the ridges effortlessly.

5. Cleaning dirty oven racks – An old but effective method of cleaning your dirty oven racks. Simply get a large, heavy-duty plastic bag and fill it with vinegar, dishwashing liquid and hot water. Then, place your oven racks inside, seal the bag and place it in a tub of warm water for an hour or so. Once this has been done, remove the racks from the plastic bag, scrub, rinse and dry. Your racks should now be just fine to use again. If you can’t get hold of a heavy-duty plastic bad, then you can use your bathtub instead. Simply fill the bath with soapy water to loosen the grime on your racks. The longer you leave them to soak, the easier it will be to get the grime off.

6. Cleaning the inside of your oven – If your oven racks and clean(ish), but the rest of the inside of your oven isn’t, then you’ll be glad to know that there is an easy solution. Simply fill a microwave-safe bowl with water and turn your oven on a high temperature for two minutes. Now, turn your oven off and leave it for a further two minutes. You can now open your oven door and using a sift rag, begin to wipe the muck on your oven walls off.

7. Removing embedded food – Removing food from your oven that has been caught in between the racks can be a real pain, but it really doesn’t have to be. To get the food out, all you need is an ordinary plastic nail file and a damp cloth or newspaper bail. Attache the cloth or newspaper to the nail file and place in between your oven racks. The trapped food should attach and be easily lifted out.

8. Regular stain removal – You may be surprised to learn that newspapers actually work a lot better to clean your oven than a sponge. Try making a ball from a few sheets of newspaper, soak it in soapy water and rub your oven down with it. The burnt food and stains should easily wipe with minimal fuss and effort. A good tip to remember when cleaning the inside of your oven is to not wait for your oven to cool down. The longer you leave cleaning your oven once it has been turned off, the harder it will be to remove dirt and stains. Burnt food is a lot easier to remove while the walls are still warm.

By following these essential cooker and oven maintenance tips, you will go a long way to ensure that not only does your cooker continue to work at its optimum level, but the chances of damage and fault are dramatically reduced. If things are already looking bleak for your cooker and you require quality replacement parts to get it back and running, then Cooker Spare Parts are here to help!

We offer an extensive range of replacement parts for a wide variety of cooker models, so no matter what you need, we are confident that you’ll find it here. Click below to browse our spare parts. For more information on any of our parts or on our oven maintenance tips, then please do not hesitate to get in touch with a member of our team today.

Browse Our Replacement Cooker Parts >

Just like all things in life, ovens are not meant to last forever and unfortunately, are prone to the odd problem here and there. If you have a Cannon cooker that has a faulty oven and unsure as to what the problem may be, here we list the potential causes to your cannon oven problems and how we can help to solve them.

Your Oven is Overheating

If you find that your Cannon oven is cooking at abnormally high temperatures, there could be several oven parts that could be at faults such as the thermostat or cooling fan.

• Faulty Thermostat – A thermostat is responsible for regulating the heat inside of your Cannon oven. Therefore, if this part isn’t functioning properly, the heat produced by your oven is going to be off, causing your meals to be either under or overcooked. This can be a major issue as you will constantly have to keep an eye on your meals as they cook, ensuring they don’t burn. If you check your thermostat and do find that this is what is causing your Cannon cooker problems, then our collection of quality replacement Cannon thermostats will get your cooking back on track.

Browse Cannon Thermostats >

• Faulty Cooling Fan – If you find that your thermostat is in good working condition, then another part which may be at the root of your overheating issues is your Cannon oven’s cooling fan. The role of this part speaks for itself. It’s meant to keep the temperature of your cooker down whilst it’s cooking your food. If it’s broken, then the temperature is going to rise leading to overcooked food. If you find that your cooling fan is the issue, you can purchase your replacement here!

Browse Cannon Cooling Fans >

Prolonged Cooking Times

Everyone wants their meals to either cook in the time stated on the packaging or quicker. There’s nothing worse than feeling hungry and deciding to cook a quick bite for it to take twice as long as planned. So, if you find that your cooking times are taking a lot longer than usual, there again maybe a couple of parts to blame.

• Faulty Oven Element – Your oven’s element is responsible for producing and distributing the heat required to cook your food. If this part is faulty, then there is not going to be enough heat to properly cook your food in the designated times, leading to increased cooking times. You can browse our range of spare Cannon oven element below.

Browse Cannon Elements >

• Broken Oven Door Seal – Your oven door seal is a strip of rubber that is attached to the rim of your oven door, providing protection as well as retaining heat to the inside of your oven whilst it cooks your food. Therefore, if there is an area or several areas where your door seal has come loose from the oven door, valuable heat could be escaping which is causing your food to take longer to cook. If your Cannon oven door seal has, in fact, come loose, you can buy a spare from us today.

 Browse Cannon Oven Seals >

Oven Not Heating Up

If you find that your Cannon cooker is not heating up at all, meaning you’re unable to cook anything whatsoever, then these are the parts that you will need to check to ensure they are working correctly.

• Oven Element – Again, your Cannon’s oven element is what produces the heat needed to cook your foods. If this part is faulty or has completely stopped working, then no heat is going to be produced which stops your foods from cooking.

Oven Clock Broken

How are you going to keep track of your cooking times if your Cannon’s oven clock is broken? For sure you can most likely use a smartphone or voice assistant to set a timer but why should you if you can have a perfectly fine oven clock? Besides, who wants to listen to one of those annoying alarm sounds over a traditional oven ‘ding’ anyway? In fact, some oven may not work at all if the clock is broken, so avoiding getting it replaced isn’t an option at all. Below you can browse our collection of oven clocks and timers to make your Cannon cooker problems a thing of the past.

Browse Cannon Clocks >

Oven Door Not Opening/Closing

What good is having a cooker if you’re not able to even open or close the oven door to cook your meals? If you can’t open your door, you’re not going to be able to get your food inside, and if you can’t close it, the heat needed to cook your food will just escape. Here at Cooker Spare Parts, we have a choice of oven door parts that are sure to help any of these two issues.

• Replacement Handles – If your oven door handle has broken or is completely missing, then you’re not going to be able to open or close your door, making your oven completely unusable. Take a look at our range of spare oven door handles below.

Browse Cannon Door Handles >

• Faulty Hinges – Your oven door’s hinges may also be the cause of your door issues. If you have broken hinges, then these are going to be causing your oven door either not open or close the way it should. Ultimately, leading to your cooking times increasing as a result of escaping heat or the door not opening at all. Browse our spares below!

Browse Cannon Oven Hinges >

These are the most common problems that you’ll find with your Cannon cooker. But, with our quality range of spare parts, these issues will soon become a thing of the past. Whether you’re in the market for genuine replacement parts of quality alternatives, we are sure to have just what you’re looking for right here at Cooker Spare Parts. Each one of our replacement Cannon parts comes with an incredible 180-day warranty, so no matter which spares you buy, you can rest assured that they will last the test of time to keep your Cannon cooker running to its best and help to avoid any further oven problems.

For more information on how our spare parts can help your Cannon cooker problems or to learn more about an individual product type/range, then please feel free to contact a member of the CSP team today by calling 02920 452 510 or emailing enquiries@cookerspareparts.com.

Just like most things in life, your Zanussi often will not last forever. Unfortunately, there may come a time when it decides to stop working and prevent you from cooking all of those delicious meals that you had planned, however, not all hope is lost!

If you find that your Zanussi oven is not heating up, take a look at the possible issues that could have caused it and what you need to do in order to get your cooker back up and running at its very best.

Clock Not Set

It can be taxing enough having to change the time on your oven clock twice a year when the clocks go back and forward, but if your home has experienced a power cut, the likelihood of having to set it again is high. It may be hard to believe but a clock that’s not set can cause your entire oven to suddenly stop working. The good thing here though is that it’s very easy and fast to fix so should be the first thing to check if you find that your Zanussi oven won’t heat up. Simply dig out your Zanussi cooker manual to find out the steps needed to set the time on your specific make and model and hopefully you should have a fully functional oven again in no time.

Our Zanussi Cooker Manuals >

Faulty Heating Element

Another common cause of your Zanussi oven not heating up could be down to a faulty element, of course! If you find that the following things are present, it is highly likely that your cooker’s element is the reason behind your culinary catastrophe.

• Your oven clock is set and is set to manual and not automatic
• The light on the face of your oven remains on until the oven has reached an adequate temperature
• You can hear the oven’s fan spinning as usual

If you find that all of these are correct, then it is time to look at your Zanussi oven’s element. To check the health of your element, be sure to follow these simple steps:

1. Identify the two connections where the electricity flows through
2. Using a multimeter on a low resistance setting, connect one probe on each of the connections
3. Measure the reading (you should typically find resistance between 20 & 100 ohms)
4. If no connection is present, then the element is most definitely dead and will need replacing

If your Zanussi heating element is at fault for your oven not heating up, then you can find your replacement today within our extensive collection of replacement parts.

Our Zanussi Heating Elements >

Thermostat

If your oven clock is set correctly and your heating element is in good working order and you still can’t feel the heat, then the next thing to inspect is your Zanussi oven’s thermostat. To do so, you’ll need to first check to see if the temperature indicator light on the face of your oven is working. This is the small light on the front of your oven that remains lit until the desired temperature is reached. If the light does not come on at all, then this may be a sign of a faulty thermostat an indication that it may need to be replaced.

You can get your Zanussi thermostat replaced in no time, thanks to our collection of high-quality spare parts!

Our Zanussi Thermostats >

Clock Not Working

As well as your clock not being set, your clock not working altogether can cause your Zanussi oven to not heat up. If you find that there is no power to any of your cooker’s circuits, be sure to check the fuse board and power supply before suspecting an issue with the cooker itself. If you both of these things are in full working order and your clock is still not working or is displaying a hand symbol meaning you are not able to set it properly, then this means your clock has unfortunately failed and will need to be replaced. You can browse our collection of Zanussi below.

Our Zanussi Oven Clocks >

Terminal Blocks

The final thing to check to find out why your Zanussi oven won’t heat up is its terminal block. The typical things to look out for that suggest an issue here include the clock not displaying or some parts of your cooker not working at all. If your terminal block is to blame, you can find it at the back of the appliance where there may be a number of circuits connected by links from the main power connection. Before checking anything, be sure to disconnect your cooker from the mains power supply. Now, you need to look for the following:

• If any connector or link is loose, which can result in heat and damage
• Signs of charrings

If you do find any of the above, then the terminal block of your Zanussi cooker will need to be replaced. You can find our collection of replacement Zanussi terminal blocks below.

Zanussi Terminal Blocks >

If you find that your Zanussi oven is not heating up the way it should, be sure to follow the above steps in order to diagnose and rectify the problem! Our collection of high-quality Zanussi spare parts will guarantee your cooker is back to its very best in no time at all – they even come with an incredible 180-day warranty, so you can rest assured that you’ll be getting a part that is built to last!

For more information on our range of Zanussi spares or to speak to one of our cooker experts about why your Zanussi oven is not heating, then please do not hesitate to contact us.